Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges Manufacturer Exporter.
Valour Alloys Inc. are Manufacturer, Supplier and Exporter of ASME 16.5 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges/SWRF Flanges. A Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges is fundamentally the same as in appearance to a Slip-On flange, however the principle contrast is the socket weld flange is bored out match a specific pipe inside-diameter. Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges are very tough, corrosion resistant and dependable.
We exports Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ), Flate Face Incoloy 800H/800HT (FF) Socket Weld Flanges, Raised Face Incoloy 800H/800HT (RF) Socket Weld Flanges, Ring Type Joint Incoloy 800H/800HT (RTJ) Socket Weld Flanges, ANSI B16.5 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges , ANSI B16.47 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges , MSS SP44 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges , ANSI B16.36 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges , ANSI B16.47 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges, ASME SB 160 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges, BS4504 Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges , ANSI B16.47 Flate Face Socket Weld Flanges , ANSI B16.5 Ring Type Joint Socket Weld Flanges , ANSI B16.47 Raised Face Socket Weld Flanges, ANSI B16.5 Flate Face Socket Weld Flanges, ANSI B16.5 Ring Type Joint Socket Weld Flanges, ANSI B16.5 Raised Face Socket Weld Flanges, Lap-Joint Face Incoloy 800H/800HT Socket Weld Flanges.
We make use of the best raw material and machinery to produce the most superior quality Incoloy 800H/800HT UNS N08810/N08811 Socket Weld Flanges.These are available in various dimensions and specifications depending upon the requirement.
Size | ½" (15 NB) to 48" (1200NB) |
---|---|
Class | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. |
Standards | ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 |
DIN | DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 |
B.S | BS4504 , BS4504, BS1560, BS10 |
Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
Coating/Surface Treatment | Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized |
150 LBS | |||||||||
---|---|---|---|---|---|---|---|---|---|
Drilling | |||||||||
Nominal Bore | Dia. (D) |
Thick. (E) |
Dia. (F) |
Dia. (B) |
Dia. (A) |
Height1 (H) |
Nbr | Holes | Dia. (C) |
1/2" |
90 |
11.2 |
35.05 |
30 |
22.2 |
14 |
4 |
15.87 |
60.3 |
3/4" |
100 |
12.7 |
42.92 |
38 |
27.7 |
14 |
4 |
15.87 |
69.9 |
1" |
110 |
14.3 |
50.80 |
49 |
34.5 |
16 |
4 |
15.87 |
79.4 |
1 1/4" |
115 |
15.9 |
63.50 |
59 |
43.2 |
19 |
4 |
15.87 |
88.9 |
1 1/2" |
125 |
17.5 |
73.15 |
65 |
49.5 |
21 |
4 |
15.87 |
98.4 |
2" |
150 |
19.1 |
91.94 |
78 |
61.9 |
24 |
4 |
19.05 |
120.7 |
2 1/2" |
180 |
22.3 |
104.65 |
90 |
74.6 |
27 |
4 |
19.05 |
139.7 |
3" |
190 |
23.9 |
127.00 |
108 |
90.7 |
29 |
4 |
19.05 |
152.4 |
300 LBS | |||||||||
---|---|---|---|---|---|---|---|---|---|
Drilling | |||||||||
Nominal Bore | Dia. (D) |
Thick. (E) |
Dia. (F) |
Dia. (B) |
Dia. (A) |
Height1 (H) |
Nbr | Holes | Dia. (C) |
1/2" |
95 |
12.7 |
35.05 |
38 |
22.2 |
21 |
4 |
15.87 |
66.7 |
3/4" |
115 |
14.3 |
42.92 |
48 |
27.7 |
24 |
4 |
19.05 |
82.6 |
1" |
125 |
15.9 |
50.80 |
54 |
34.5 |
25 |
4 |
19.05 |
88.9 |
1 1/4" |
135 |
17.5 |
63.50 |
64 |
43.2 |
25 |
4 |
19.05 |
98.4 |
1 1/2" |
155 |
19.1 |
73.15 |
70 |
49.5 |
29 |
4 |
22.22 |
114.3 |
2" |
165 |
20.7 |
91.94 |
84 |
61.9 |
32 |
8 |
19.05 |
127.0 |
2 1/2" |
190 |
23.9 |
104.65 |
100 |
74.6 |
37 |
8 |
22.22 |
149.2 |
3" |
210 |
27.0 |
127.00 |
117 |
90.7 |
41 |
8 |
22.22 |
168 |
600 LBS | |||||||||
---|---|---|---|---|---|---|---|---|---|
Drilling | |||||||||
Nominal Bore | >Dia. (D) |
Thick. (E) |
Dia. (F) |
Dia. (B) |
Dia. (A) |
Height1 (H) |
Nbr | Holes | Dia. (C) |
1/2" |
95 |
14.3 |
35.05 |
38 |
22.2 |
22 |
4 |
15.87 |
66.7 |
3/4" |
115 |
15.9 |
42.92 |
48 |
27.7 |
25 |
4 |
19.05 |
82.6 |
1" |
125 |
17.5 |
50.80 |
54 |
34.5 |
27 |
4 |
19.05 |
88.9 |
1 1/4" |
135 |
20.7 |
63.50 |
64 |
43.2 |
29 |
4 |
19.05 |
98.4 |
1 1/2" |
155 |
22.3 |
73.15 |
70 |
49.5 |
32 |
4 |
22.22 |
114.3 |
2" |
165 |
25.4 |
91.94 |
84 |
61.9 |
37 |
8 |
19.05 |
127.0 |
2 1/2" |
190 |
28.6 |
104.65 |
100 |
74.6 |
41 |
8 |
22.22 |
149.2 |
3" |
210 |
31.8 |
127.00 |
117 |
90.7 |
46 |
8 |
22.22 |
168.3 |
Valour Alloys Inc. exports INCOLOY 800H/800HT UNS N08810/N08811 SOCKET WELD FLANGES to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to INCOLOY 800H/800HT UNS N08810/N08811 SOCKET WELD FLANGES kindly get back to us on :-
Call Us:
+91-22-23820045