Valour Alloys Inc. is one of the prime Manufacturers, Exporters and Supplier of Cu-Ni 90/10 Sheets & Plates that are being sourced by utilizing high caliber of raw material and makes a point to give durability of most highest quality of industry standard products. Copper Nickel C70600 Sheets is too perceived as Copper Nickel 90/10 Plates, for the reason that it is being comprised of 10 percent of nickel, and with ASTM B466 or ASME SB466 models. The addition of inhibited quantities of manganese and iron in Curpo Nickel ASTM B466 UNS C70600 90/10 Sheets also offer the 90/10 combination in an unordinary resistance to general consumption and anxiety splitting, notwithstanding impingement and disintegration, due to unstable water that contains silt flowing and air bubbles at elevated velocities.
The 90/10 Sheets & Plates manufactured by Valour Alloys Inc. is known to be superior not only in quality but also because it complies with the National and International standards of ASTM B151 & ASME SB151. It falls under this category also as UNS C70600. The quality of 90/10 Sheets & Plates made by Valour Alloys Inc. are in line with customer requirement and maintaining the customer satisfaction level along with various levels of quality testing.
| Standard | ASTM B151, ASME SB151 |
|---|---|
| Werkstoff Nr | 2.0872 |
| Size | 15NB TO 150 NB IN |
| Grade | CU-NI-90/10 (UNS No C70600) |
| Type | Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Application | Sea water pipework, Offshore fire water systems, Heat exchangers and condensers, Sheathing of legs and risers on offshore platforms and boat hulls, Hydraulic lines, Fish cages for aquaculture, Desalination units. |
| Element | Content (%) |
|---|---|
| Cu | 88.7 |
| Fe | 1.3 |
| Ni | 10.0 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength, ultimate | 303-414 MPa | 43900-60000 psi |
| Tensile strength, yield (depending on temper) | 110-393 MPa | 16000-57000 psi |
| Elongation at break (in 254 mm) | 42.00% | 42.00% |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
| Shear modulus | 52.0 GPa | 7540 ksi |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 140 GPa | 20300 ksi |
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.94 g/cm3 | 0.323 lb/in3 |
Valour Alloys Inc. exports Copper Nickel Alloy 90/10 SHEETS & PLATES MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to Copper Nickel Alloy 90/10 SHEETS & PLATES MANUFACTURER AND EXPORTER kindly get back to us on :-
Call Us:
+91-22-23820045
