Valour Alloys Inc. is one of the prime Manufacturer, Exporter and Supplier of Copper Nickel (Cu-Ni 70/30) Round Bars, likewise distinguished as Copper nickel alloy 715 Rods, that are being sourced by utilizing high caliber of raw material and makes a point to give solidness of most noteworthy nature of industry standard products. As the standard term for C715 Copper Nickel Bars are entirely perceived as ASME SB466 and ASTM B466, our Curpo Nickel Round Bars is known for its workability, formability, weldbility and moderate quality. This specific compound is likewise on numerous occasions refer as Copper Nickel 70/30 Round Bars for the reason that of it is being comprised of thirty percent of nickel in its work of art.
Then, these Copper Nickel Alloy 70/30 Round Bars & Rods can further be modified as far as sizes and thicknesses according to particular necessities given by our regarded customers. We offer these Curpo Nickel UNS C71500 70/30 Round Bars & Rods in business sector driving costs.
| Standard | ASTM B 111 |
|---|---|
| Grade | CU-NI-70/30 (UNS No C71500) |
| Werkstoff Nr | 2.0882 |
| Range | 5 mm To 500 mm thick in 100 mm TO 6000 mm |
| Wire Range | 50 Swg. to 4 Swg. |
| Length | 100 mm to 3660 mm Long |
| Form | Round, Square, Hex (A/F), Bush, Rectangle , Flat, Wire Mesh |
| Application | Sea water pipework, Offshore fire water systems, Heat exchangers and condensers, Sheathing of legs and risers on offshore platforms and boat hulls, Hydraulic lines, Fish cages for aquaculture, Desalination units. |
| Element | Content (%) |
|---|---|
| Copper, Cu | 70.0 |
| Nickel, Ni | 30.0 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength, ultimate | 372-517 MPa | 54000-75000 psi |
| Tensile strength, yield (depending on temper) | 88.0-483 MPa | 12800-70100 psi |
| Elongation at break (in 381 mm) | 45.0% | 45.0% |
| Charpy impact | 107 J | 78.9 ft-lb |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
| Shear modulus | 57.0 GPa | 8270 ksi |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 150 GPa | 21800 ksi |
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.94 g/cm3 | 0.323 lb/in3 |
| Melting point | 2140°F | 1171°C |
Valour Alloys Inc. exports Copper Nickel Alloy 70/30 ROUND BARS & RODS MANUFACTURER AND EXPORTER to Dubai, Sharjah, Abhdhabi, Oman, Qatar, Saudi Arabia, Kuwait, Iran, Iraq, Malaysia, Indonesia, Norway, Nigeria, Algeria, Egypt, Libya, Brazil, Angola, Guinea, Mozambique, Tanzania, Venezuela, Canada, Ecuador, Ghana, Vietnam, Trinidad And Tobago, Thailand, Korea, Taiwan, Australia, Italy, France, Spain, Russia, Germany & Azerbaijan countries.
For further enquiries related to Copper Nickel Alloy 70/30 ROUND BARS & RODS MANUFACTURER AND EXPORTER kindly get back to us on :-
Call Us:
+91-22-23820045
